Browse Categories

White Occupancy Sensor 180 degrees range 120/277 Volts, 50/60 hz Watt Stopper Sensors (PW-200-W)

Need a Project Quote? Email details to customerservice@mainelectricsupply.com

White Occupancy Sensor 180 degrees range 120/277 Volts, 50/60 hz Watt Stopper Sensors (PW-200-W)

PW-200-W 120/277V WLSW OCC SEN
Item #: PW-200-W

WattStopper® Wall Switch Occupancy Sensor, Commercial Dual Relay, Series: PW Series, 120/230/277 VAC, 0 to 1200 W, 1/6 hp, Passive Infrared Sensor, 525 sq-ft Coverage, 180 deg Viewing, 5 to 30 min Delay, Fluorescent/Incandescent/LED Lamp, Flying Lead, Automatic On/Off, Manual On/Off Control Output, Surface Mount, 35 deg C, Plastic, White, 2.73 in L x 1.76 in W x 1.83 in H

  • Time delay adjustments – 5 to 30 min at minimum, 3 minimum if no activity after 30 s at walk through mode, 5 s for 10 min with dip switch setting at test mode
  • High or low (dip switch) PIR adjustment
  • 0 to 800 W tungsten or ballast, 1/6 hp motor load limit for each relay at 120 VAC and 0 to 1200 W ballast load limit for each relay at 277 VAC
  • Detection signature analysis eliminates false triggers and provides immunity to RFI and EMI
  • Zero crossing for long relay life
  • Vandal-resistant lens combines precise coverage with durability
  • Choice of manual on or auto-ON operation
  • Selectable walk through mode turns lights off 3 min after the room is initially occupied if no motion is detected after the first 30 s
  • Test mode allows quick and easy adjustments
  • Selectable audible alert for impending shutoff
  • In automatic mode, sensor returns automatically to auto-ON after lights are turned OFF manually, ideal for presentations
  • Four occupancy logic options give users the ability to customize control to meet application needs
  • Optional light level sensing with simple setup
  • Service mode allows sensor to operate as a service switch in the unlikely event of a failure
  • Sensor coverage tested to NEMA guide publication WD 7-2000
  • Compatible with decorator wallplates
  • 2-relays for control of two separate lighting loads or circuits
  • Magnetic or electronic ballast load type
  • Wall switch sensor turns lights off and on based on occupancy
  • It contains two relays for controlling two independent lighting loads or circuits
WATPW200W, PW-200-W,Watt Stopper,WATPW200W,Occupancy Sensor,120/277 Volts, 50/60 hz,White;Legrand ; Legrand ; 754182919352 ; Legrand ; On-Q® ; On Q reg ; OnQreg ; IDW_14188183 ; IDW 14188183 ; 273231 ; 14188183 ;

LOG IN FOR STOCK STATUS
UOM : EA
Qty:
  • Item#: PW-200-W
  • Short Code: PW200W
  • Our Item #: WATPW200W
  • UNSPSC: 39122236
  • UPC: 754182919352

Item Specifications

  • White
  • Flying Lead
  • Automatic On/Off, Manual On/Off
  • 525 sq-ft
  • 2.73 in L x 1.76 in W x 1.83 in H
  • Fluorescent/Incandescent/LED
  • Plastic
  • Surface
  • 0 to 1200 W, 1/6 hp
  • Passive Infrared
  • PW Series
  • 35 deg C
  • 5 to 30 min
  • Commercial Dual Relay
  • 180 deg
  • 120/230/277 VAC