Need a Project Quote? Email details to customerservice@mainelectricsupply.com
Need a project quote? E-Mail details to
customerservice@mainelectricsupply.com
Ivory Occupancy Sensor 180 degrees range 120/277 Volts, 50/60 hz Watt Stopper Sensors (PW-200-I)
Item #: PW-200-I
WattStopper® Wall Switch Occupancy Sensor, Commercial Dual Relay, Series: PW Series, 120/230/277 VAC, 0 to 1200 W, 1/6 hp, Passive Infrared Sensor, 525 sq-ft Coverage, 180 deg Viewing, 5 to 30 min Delay, Fluorescent/Incandescent/LED Lamp, Flying Lead, Automatic On/Off, Manual On/Off Control Output, Surface Mount, 35 deg C, Plastic, Ivory, 2.73 in L x 1.76 in W x 1.83 in H
- Time delay adjustments – 5 to 30 min at minimum, 3 minimum if no activity after 30 s at walk through mode, 5 s for 10 min with dip switch setting at test mode
- High or low (dip switch) PIR adjustment
- 0 to 800 W tungsten or ballast, 1/6 hp motor load limit for each relay at 120 VAC and 0 to 1200 W ballast load limit for each relay at 277 VAC
- Detection signature analysis eliminates false triggers and provides immunity to RFI and EMI
- Zero crossing for long relay life
- Vandal-resistant lens combines precise coverage with durability
- Choice of manual on or auto-ON operation
- Selectable walk through mode turns lights off 3 min after the room is initially occupied if no motion is detected after the first 30 s
- Test mode allows quick and easy adjustments
- Selectable audible alert for impending shutoff
- In automatic mode, sensor returns automatically to auto-ON after lights are turned OFF manually, ideal for presentations
- Four occupancy logic options give users the ability to customize control to meet application needs
- Optional light level sensing with simple setup
- Service mode allows sensor to operate as a service switch in the unlikely event of a failure
- Sensor coverage tested to NEMA guide publication WD 7-2000
- Compatible with decorator wallplates
- 2-relays for control of two separate lighting loads or circuits
- Magnetic or electronic ballast load type
- Wall switch sensor turns lights off and on based on occupancy
- It contains two relays for controlling two independent lighting loads or circuits
WATPW200I, PW-200-I,Watt Stopper,WATPW200I,Occupancy Sensor,120/277 Volts, 50/60 hz,Ivory;Legrand ; Legrand ; 754182919338 ; Legrand ; On-Q® ; On Q reg ; OnQreg ; IDW_14188181 ; IDW 14188181 ; 273231 ; 14188181 ;
Item References
- Item#: PW-200-I
- Short Code: PW200I
- Our Item #: WATPW200I
- UNSPSC: 39122236
- UPC: 754182919338
Specification Sheets
Item Specifications
-
Ivory
-
Flying Lead
-
Automatic On/Off, Manual On/Off
-
525 sq-ft
-
2.73 in L x 1.76 in W x 1.83 in H
-
Fluorescent/Incandescent/LED
-
Plastic
-
Surface
-
0 to 1200 W, 1/6 hp
-
Passive Infrared
-
PW Series
-
35 deg C
-
5 to 30 min
-
Commercial Dual Relay
-
180 deg
-
120/230/277 VAC